Description
During transport and storage, the plastic granules absorb moisture. If the plastic is not optimally dried during processing, this has a variety of negative effects on the end product. Bubbles or streaks on the surface or the dimensional accuracy is not given. The measuring chamber for granulate dryers can be easily connected to the granulate dryer via a Teflon line. During drying, the dew point should be in the range of -30…-60 °C. Process connection G ¼” female thread for connection to the process air. G ½” thread for connection of the dew point sensor. The measuring chamber can be used from -1 to 16bar.
- Applicable for -1…16 bar
- Process connection: Plug connection for 6 mm hose at inlet and outlet or G 1/4″ female thread when using without plug connections
- Sensor connection: G 1/2″ female thread
- The flow of at least 2 liters / min of air / gas must be ensured by the customer
